Leo's - News

+

latest issueof the JRA Newsletter you find here. now with table of content.

+

prefabricating the pantry

+

deckhouse in progress

+

laminating main mast partners

+

building vent boxes with water trap

+
windows in hull sides covered with polycarbonate

+

fore hatch and doors of toilet room under construction

+

working on bow well and toilet room

+

installing foam flotation and hardwood post for mooring lines and to secure inner end of boomkin

+

This year's Junk Rig Association Summer Rally will take place June 25/26th at the Warsash Sailing Club, Shore Road, Warsash, Hants.
Robin Blain will give a talk and update of the Swing Wing Rig.

+

vertical frames for motor board in place

+

boomkins for mizzen sheet under construction

+

Bilgeboard pivot pin flush with hull side
covered with stainless steel plate, will be sealed later

+

Clay Everington wrote an article describing his journey from England to the Carribian and back in his junk-rigged Kingfisher 26. It was published in the recent JRA Newsletter. He felt the story could be interesting for non JRA members also. So here it is.
+

some additions to Chinese Lug Sails and Dieppe Junk Meeting

+

foam flotation in the bilge board cases

cutting holes for bilge board pins with Japanese circle cutter

+

second hand navigation lights

+

Added a new page that has some information about Joshu and the Koan "Mu."
see here

+

some changes/additions to the Chinese Lug Sails pages.
Cover of the latest JRA Newsletter

+


	News	2005/11/12
	+ latest issueof the JRA Newsletter you find here. now with table of content. + prefabricating the pantry + deckhouse in progress + laminating main mast partners + building vent boxes with water trap + windows in hull sides covered with polycarbonate + fore hatch and doors of toilet room under construction + working on bow well and toilet room + installing foam flotation and hardwood post for mooring lines and to secure inner end of boomkin + This year's Junk Rig Association Summer Rally will take place June 25/26th at the Warsash Sailing Club, Shore Road, Warsash, Hants. Robin Blain will give a talk and update of the Swing Wing Rig. + vertical frames for motor board in place + boomkins for mizzen sheet under construction + Bilgeboard pivot pin flush with hull side covered with stainless steel plate, will be sealed later + Clay Everington wrote an article describing his journey from England to the Carribian and back in his junk-rigged Kingfisher 26. It was published in the recent JRA Newsletter. He felt the story could be interesting for non JRA members also. So here it is. + some additions to Chinese Lug Sails and Dieppe Junk Meeting + foam flotation in the bilge board cases cutting holes for bilge board pins with Japanese circle cutter + second hand navigation lights + Added a new page that has some information about Joshu and the Koan "Mu." see here + some changes/additions to the Chinese Lug Sails pages. Cover of the latest JRA Newsletter + found a tree for the mizzen mast in our garden. no kidding! will probably be replaced someday with a carbon fiber pole, but is o.k. to beginn with. have to cut 1m off the top but will wait until the very end... + not sure yet where to store water, so this is a flexible solution: 8x 20l German army water canister + Sestrel hand bearing compass from Scottland unused batteries this Walker log made his last journey from Hongkong to Singapur and Thailand ebay hunting... + some work done on the rudder (AS39 style) +